Remember when the first time you tied your shoelace before going to school, and everyone was proud? Well, after all these years, you are again stuck in the same situation. No, don’t get me wrong. I’m not saying you have forgotten to tie your shoelaces, but now it’s time you learn how to make a big bow out of ribbon.

Like a cherry on top, a bow can also make your gift look exquisite at a party. If you are going to a wedding invitation or a friend’s birthday party, bows can add an extra spark to your gifts. In this article, we will share a few tricks to know how to make a big bow out of ribbon. 

How To Make A Big Bow Out Of Ribbon?

Many people don’t know how to tie a bow with ribbon, and that’s why they simply tie a ribbon on a gift. But that looks exceptionally dull, doesn’t it? Some people also pay the shopkeepers to wrap the gift and tie a bow on it. But there’s a different joy in gift wrapping and tying a bow on the top. So, if you want to know how to make a bow, it’s time you focus on these tips. 

1: How To Tie A Bow With Wired Ribbon?

1: How To Tie A Bow With Wired Ribbon?

We are starting our lesson on how to make a big bow out of ribbon with a creative one. Making a bow with a wired ribbon is easy because the wire inside the ribbon gives a firm texture to the ribbon. So, when you make the bow, it doesn’t open up easily. 

What You need

  • Wired Ribbon
  • Ruler
  • Scissors
  • Pipe Cleaner

The Steps

  1. Take a ribbon of approx 36 inches in length, and make a loop at the end. Just fold one side over another, and keep your thumb at the center to make the loop.
  2. Create another loop in the same process beneath the center loop. Now, repeat the process, and continue making several loops, one bigger than another.
  3. When you are done with a few loops, make a final one. Make sure it is the biggest loop. Trim the bow closer to the center of your circle.
  4. Tuck the edge of the ribbon beneath the final loop. Now, insert a pipe cleaner in the center loop to make all the circles come together.
  5. Cut the tail of your final loop to give it two ends.
  6. Finally, fluff the loops from all sides so that it looks voluminous and fluffy.

Also Read: Top 7 Best Japanese Restaurant Of The World – 2021 Best Guide

2: How To Make A Floral Ribbon Bow?

2: How To Make A Floral Ribbon Bow?

If you want to know how to make a bow out of ribbon, you must learn how to make a floral bow. A floral bow looks pretty, and it can embellish many dull-looking things. So, let’s get on with it.

What You Need

  • Ribbon
  • Ruler
  • Scissors

The Steps

  1. Firstly, cut two pieces of ribbon. One should be of short length, and the other should be a bit longer.
  2. Create a loop at the end of the longer loop by folding one part over another, and twist it.
  3. Now, hold the twist, on the one hand, make another loop on the opposite side, and twist it. 
  4. Keep on repeating this step until and unless you get your preferred size of the bow. But, make sure you have some hanging ribbons left to make the tails.
  5. Now, use the shorter ribbon to tie all the loops. Bind the know at one end, and double knot it so that it doesn’t open up.
  6. Trim the edges of the tails a little, and fluff it up.

3: How To Make A Grosgrain Ribbon Bow?

3: How To Make A Grosgrain Ribbon Bow?

If you want to know how to make a big bow out of ribbon, make sure you learn to make a grosgrain bow. It is one of the most creative ways to tie a bow, so make sure you know it.

What You Need

  • Grosgrain ribbon
  • Ruler
  • Scissors
  • Glue
  • A box

The Steps

  1. Cut 2 meters of grosgrain ribbon after measuring the length. 
  2. Wrap it around a box, and use glue to hold the ribbon, and the box together. 
  3. Now, make a loop at the center. Keep your finger in the middle, and make another loop. Keep on joining it in the center with glue.
  4. Make three more loops, and bring them all around the center. Join the loops at the center with glue, and your grosgrain bow is finished.

Also Read: Top 7 Best Vertical Farming Companies In The World – 2021 Updates

4: How To Make Holiday Paper Bows?

4: How To Make Holiday Paper Bows?

Not all the bows you are going to make will be enormous. So, the best way to know how to make a big bow out of ribbon is to use holiday paper. 

What You Need

  • Holiday paper
  • Ruler
  • Scissor
  • Stapler

The Steps

  1. When you have the holiday paper, cut them into three sections. Make three ribbons of 1″x12″ size, three stripes of 1″x10″ size, and three ribbons of 1″x5″ size.
  2. Now fold one end of a ribbon on the top, and fold another end on the bottom. Keep on repeating the step for all nine strips.
  3. Staple all the ribbons with one another and staple the center.
  4. Now, assemble the larger ribbons, and collect the smaller ribbons together.
  5. Place them on top of each other, and join them in the center loop to finish the bow.

5: How To Make Tissue Paper Bows?

5: How To Make Tissue Paper Bows?

To all my eco-friendly buddies out there, we have an idea to make tissue paper bows. If you want to know how to make a big bow out of ribbon, make the tissue paper bows because they are big.

What You Need

  • Coloring tissue paper
  • Twine/ribbon
  • Scissor
  • Tape

The Steps

  1. Open an extended length of tissue paper, and scrunch it to make a thin strip out of it.
  2. Wrap the two sides in the middle, and overlap the edges. It will give the bow a natural look of a loop.
  3. Wrap a tape around the center because it will secure both sides.
  4. Now, fluff the outer loops, and keep on doing it until you like the shape of the bow.
  5. Once you are satisfied with the look, wrap a twine/ribbon around the center to finish the bow.

Also Read: 7 Best Local Businesses Through Which You Can Earn Money In 2021

6: How To Make A Duct Tape Bow?

6: How To Make A Duct Tape Bow?

Did you know you can make a bow out of duct tape? We have another unique idea for you. So, learn how to make a bow out of ribbon in this special way.

What You Need

  • Glittery duct tape
  • Coloring tissue paper
  • Cutting mat
  • Rotary cutter
  • Tape
  • Scissor

The Steps

  1. Trim the tissue paper with a rotary cutter, and tie it around the glitter tape.
  2. Fold the glitter duct tapes in half so that the glittery side stays on top.
  3. Press the center of the folded strip to mark the middle.
  4. Now, use another technique to fold the duct tape and use the sticky ends to create the loop this time.
  5. Take another strip, and cut it in half.
  6. Wrap the strip around the center, and cut the edges.
  7. Secure the bow with the exposed tape, and your glittery bow is ready.

Also Read: 7 Best Gifts For Farmers – Gift Ideas For Farmers In 2021

7: How To Make A Burlap Bow?

7: How To Make A Burlap Bow?

Yes, a burlap bow is a final addition to our ‘how to make a big bow out of ribbon’ lesson. So, let’s get on with the supplies and the steps.

What You Need

  • Burlap ribbon
  • Ruler
  • Scissor
  • Thread
  • Needle

The Steps

  1. Cut 4 strips from the burlap ribbon. Two of them should be 18 inches, one should be 1 inch, and the last should be 4 inches. 
  2. Create two circles using one long piece and one medium. Now sew them in the middle so that they stay together.
  3. Keep the small circle on top of the large circle, and sew them again in the middle.
  4. Fold the ribbon in the middle to give it a fluffy look on the sides.
  5. Take your shortest piece, and add it as the tail of the bow. Then, cut it from the middle to create two ends. Sew it again to affix it to the bow.
  6. Trim the edges of the tail, and cut them diagonally. 

Frequently Asked Questions [FAQs]

If you think we have given you some good tips on how to tie a bow with ribbon, you can ignore this section. But, we have still curated a few questions for you to understand the ribbon-making concept even better.

1: How Much Ribbon Is Needed To Make A Bow?

Ans: You will require approx 4 yards of ribbon to make the bow, and another 4 yards to fit the bow around your gift package. If you plan to use a florist wire, you may need one of 4 inches of size. Cut the wire before you start making your bow, and keep a length that you can reach.

2: How Many Loops Should A Wreath Bow Have?

Ans: The more loops you will make in a bow, the bigger, and fluffier it will look. But, if you want to make a perfect wreath bow, it should include a maximum of six loops. You must also have two tails hanging even if their lengths are different.

3: Where Do You Put The Bow On A Wreath?

Ans: Ideally, you must put the bow on the top of the wreath, or on the bottom of the wreath. If your bow has short curls, it will look better when it is on top. But, if it has longer curls, it will look better when it’s on the bottom. 

Final Thoughts

You must be an expert by now on how to make a big bow out of ribbon, right? We have given you some pretty crafty ideas to get on with this bow-making journey. Now, apply any of these ideas, and start creating those beautiful-looking bows for your next occasion. If you want to know anything more about how to tie a bow, please let us know in the comment box.

Read More:

What's your reaction?

Excited
1
Happy
0
In Love
0
Not Sure
0
Silly
0
Debasmita
Debasmita Dasgupta is a creative content writer. She is an experience individual in the field of web content writing and her expertise revolves around diverse subjects. Driven by utmost passion towards writing, she ensures that clients always get a quality content from her

    You may also like

    Leave a reply

    Your email address will not be published. Required fields are marked *